Sewing Supplies

Janome Satin Stitch Foot F (9mm)

MSRP:

Was:

Now: $3.99
Bernina Bobbins 5 Pack for 4 Series, 5 Series, 7 Series and New B990 Machines

MSRP:

Was:

Now: $17.99
Janome HP Professional Grade Foot for 9mm Machines

MSRP:

Was:

Now: $8.99
Janome Acufeed 1/4" Seam Foot for 9mm Machines with Acufeed

MSRP:

Was:

Now: $19.99
Janome Acufeed Ditch Quilting Foot for 9mm Machines

MSRP:

Was: $42.60

Now: $36.99
Janome Clear View 1/4" Foot for 9mm Machines

MSRP:

Was:

Now: $18.99
Janome 1/4" Foot for 9mm Machines

MSRP:

Was:

Now: $6.99
Janome Open Toe Satin Stitch Foot for 9mm Machines

MSRP:

Was:

Now: $8.99
Janome 9mm Even Feed Foot

MSRP:

Was:

Now: $26.99
Bernina CB Style Bobbin (Individual) Fits Machines With CB Style Hook System

MSRP:

Was:

Now: $3.25
Janome Bobbin Case For Embroidery MC15000 MC500e MC9900 S9 and More

MSRP:

Was:

Now: $34.99
Janome Dual Feed Holder (Wide) for 9mm Machines

MSRP:

Was:

Now: $34.99
Janome Ditch Quilting Foot For 9mm Machines

MSRP:

Was:

Now: $23.99
Janome Snap On Presser Foot holder for 9mm Machines

MSRP:

Was:

Now: $9.99
Janome AcuFeed Foot With Foot Holder (Single) for 9mm Machines

MSRP:

Was: $61.00

Now: $52.99
Janome ¼ Inch Foot without Guide for 9mm Machines

MSRP:

Was:

Now: $26.99
Janome 2 Spool Thread Stand - Click for Applicable Models

MSRP:

Was:

Now: $54.99
Janome Gathering Foot For 9mm Machines

MSRP:

Was:

Now: $23.99
Janome AcuFeed Long Quilting Guide Bar Left And Right Set

MSRP:

Was:

Now: $18.99
Janome Applique Foot For 9mm Machines

MSRP:

Was:

Now: $23.99
Bobbin Case for Sparrow 30 and Celine

MSRP:

Was:

Now: $19.99
Oliso TG1600 Pro Plus Smart Iron Yellow

MSRP:

Was:

Now: $199.99
Janome High Shank Ruler Work Foot (QR)

MSRP:

Was:

Now: $41.99
Janome Zipper Foot E Fits 9mm Machines

MSRP:

Was:

Now: $4.99
Janome Piping Foot for 9mm Machines

MSRP:

Was:

Now: $23.99
Brother Bobbin Case Cover Fits CE, CS, LB, LS, PE, XR, NS, SE And Other Brother Sewing Machines

MSRP:

Was:

Now: $9.99
Janome Ultraglide Foot For 9mm Machines

MSRP:

Was:

Now: $23.99
Janome Edge Stitch Foot For 9mm Machines

MSRP:

Was:

Now: $31.99
Janome Triangular Screwdriver

MSRP:

Was:

Now: $1.99
Janome Embroidery Foot P fits 9mm Machines

MSRP:

Was:

Now: $10.99
Gingher 8” Knife Edge Bent Dressmaker Shears

MSRP:

Was:

Now: $53.79
Embroidery Foot P for Janome MC9900 & Elna EL860 eXpressive

MSRP:

Was:

Now: $4.99
Authentic Janome Sewing Bobbin Case Cleaner

MSRP:

Was:

Now: $2.99
Janome AcuFeed Open Toe Satin Stitch Foot for 9mm Machines

MSRP:

Was: $48.30

Now: $41.99
Janome Overedge Foot M for 9mm Machines

MSRP:

Was:

Now: $10.99
Janome Concealed Zipper Foot For 9mm Machines

MSRP:

Was:

Now: $36.99
Bernette B64 Upper Knife

MSRP:

Was:

Now: $24.99
Janome Border Guide Foot for 9mm Machines

MSRP:

Was:

Now: $23.99
Janome Convertible Even Feed Foot Set for 9mm Non Acufeed Models

MSRP:

Was:

Now: $104.99
Gingher 6" Double Curved Embroidery Scissors

MSRP:

Was:

Now: $44.99

Janome Satin Stitch Foot F (9mm)

Genuine Janome Sewing Satin Stitch Foot F (9mm) For sewing dense zigzag stitching. The bottom of the foot is beveled for smooth delivery of thread when sewing decorative or sating stitches. Foot is made of clear plastic making it easier to view...

MSRP:

Was:

Now: $3.99
Bernina Bobbins 5 Pack for 4 Series, 5 Series, 7 Series and New B990 Machines

The Bernina Bobbins 5 Pack is designed for use with Bernina 4 Series, 5 Series, 7 Series, and New B990 Machines. These high-quality bobbins are essential for maintaining smooth and reliable sewing performance. Compatible with a range of Bernina...

MSRP:

Was:

Now: $17.99
Janome HP Professional Grade Foot for 9mm Machines

Janome HP Professional Grade Foot for 9mm Machines A combination of a slim foot and a ¼ inch foot that mimics what you would find on industrial sewing machines. The foot’s compactness makes it especially suitable for curve sewing and 1/4” piecing. Fits...

MSRP:

Was:

Now: $8.99
Janome Acufeed 1/4" Seam Foot for 9mm Machines with Acufeed

Janome Acufeed 1/4" Seam Foot for 9mm Machines with Acufeed A popular foot with patchworkers for that essential 1/4" seam. The guide on the foot enables you to sew a perfect 1/4" seam every time while the AcuFeed system guides your fabric...

MSRP:

Was:

Now: $19.99
Janome Acufeed Ditch Quilting Foot for 9mm Machines

Janome Acufeed Ditch Quilting Foot for 9mm Machines This foot combines AcuFeed's perfect feeding with a guide allowing you to stitch neatly in the ditch. It is also ideal for top stitching. Keeps both decorative and strait stitches in the...

MSRP:

Was: $42.60

Now: $36.99
Janome Clear View 1/4" Foot for 9mm Machines

Janome Clear View 1/4" Foot for 9mm MachinesFor the most control over your fabric while piecing, most quilters prefer to use the Straight Stitch Needle Plate. This foot works specifically with that plate to achieve a perfect 1/4" seam in Straight Stitch...

MSRP:

Was:

Now: $18.99
Janome 1/4" Foot for 9mm Machines

Janome 1/4" Foot for 9mm Machines A popular foot with patchworkers for that essential 1/4 inch seam. The guide on the foot enables you to sew a perfect 1/4 inch seam every time. The guide can also be used wherever a 1/4 inch seam is called for but the...

MSRP:

Was:

Now: $6.99
Janome Open Toe Satin Stitch Foot for 9mm Machines

Janome Open Toe Satin Stitch Foot for 9mm Machines The open toe on this foot allows a better view of the sewing in progress. This foot can be used for quilting, monogramming, applique, and cut work. It is sometimes referred to as the Custom...

MSRP:

Was:

Now: $8.99
Janome 9mm Even Feed Foot

Janome 9mm Even Feed Foot for S5 and 9900The Even Feed Foot, sometimes referred to as the walking foot, is designed with a set of feed dogs which allow the fabric to feed without shirting and eliminates the problem of the under layer of fabric coming up...

MSRP:

Was:

Now: $26.99
Bernina CB Style Bobbin (Individual) Fits Machines With CB Style Hook System

Bernina Bobbin (Individual) Fits Machines With CB Style Hook SystemFits Bernina Sewing Machine Models:120, 125, 130, 131, 135, 140, 145, 150, 153, 155, 160, 163, 165, 170, 220, 230, 240, 330, 430, 440, 530, 532, 534, 600, 610, 630, 642, 644, 700, 707,...

MSRP:

Was:

Now: $3.25
Janome Bobbin Case For Embroidery MC15000 MC500e MC9900 S9 and More

Janome Embroidery Yellow Dot Bobbin Case Fits Sewing Machine Models: Janome: MC15000V3, MC400E, MC500E, MC9900, Skyline S9 Elna: eXpressive 820, eXpressive 830, eXpressive 860, eXpressive 900, eXpressive 920, eXpressive 940 Note: This item...

MSRP:

Was:

Now: $34.99
Janome Dual Feed Holder (Wide) for 9mm Machines

Janome Dual Feed Holder (Wide) for 9mm Machines The Janome Dual Feed Holder (Wide) for 9mm Machines is the original part that came with your machine. The AcuFeed Flex system allows you to sew through many layers of fabric very easily without slipping,...

MSRP:

Was:

Now: $34.99
Janome Ditch Quilting Foot For 9mm Machines

Janome Ditch Quilting Foot For 9mm Machines A very useful addition to the sewing room when wanting a perfectly straight "stitch in the ditch". The guide on the foot spreads the seams allowing you to stitch perfectly in the ditch, and is also useful...

MSRP:

Was:

Now: $23.99
Janome Snap On Presser Foot holder for 9mm Machines

Janome Snap On Presser Foot holder for 9mm Machines This is the snap on shank or presser foot holder that originally came on your machine listed below. For use with 9mm machines including the Janome MC15000, MC14000, MC12000, MC9900, MC8200, MC8900,...

MSRP:

Was:

Now: $9.99
Janome AcuFeed Foot With Foot Holder (Single) for 9mm Machines

Janome AcuFlex Holder and Foot (Single) for 9mm Machines Now there is an AcuFeed Flex system for your more narrow projects! Sometimes, the standard AcuFeed Flex twin system is just a little too bulky for very fine work. In these cases, you can...

MSRP:

Was: $61.00

Now: $52.99
Janome ¼ Inch Foot without Guide for 9mm Machines

Janome ¼ Inch Foot without Guide for 9mm Machines Seasoned quilters prefer to use a 1/4" seam foot without the assistance of guide to avoid catching on the seam allowance. There is even a 1/4" guide line on the left side of the needle drop for added...

MSRP:

Was:

Now: $26.99
Janome 2 Spool Thread Stand - Click for Applicable Models

Janome 2 Spool Thread Stand Fits 9mm MachinesThe Janome 2 Spool Thread Stand Fits 9mm Machines can hold two spools of the thread to make sewing with different colors easier on your Machine.Use with Janome Models: MC15000, MC14000, MC12000, MC9900,...

MSRP:

Was:

Now: $54.99
Janome Gathering Foot For 9mm Machines

Janome Gathering Foot For 9mm Machines With the Gathering Foot it's easy to create the gather you want. The bottom fabric is gathered, seamed and overcast to a flat top fabric all in one easy operation. For use with: Horizon Memory Craft...

MSRP:

Was:

Now: $23.99
Janome AcuFeed Long Quilting Guide Bar Left And Right Set

Janome AcuFeed Long Quilting Guide Bar Left And Right Set Don't waste time drawing straight lines on your quilt top! The Long Quilting Guide Bar is used to keep lines of quilting straight. The new extra-long format allows spacing up to 4 1/4". The set...

MSRP:

Was:

Now: $18.99
Janome Applique Foot For 9mm Machines

Janome Applique Foot For 9mm Machines When doing applique we often use the standard satin stitch foot or, more recently, the open toe satin stitch foot for greater visibility. However, Janome also has a dedicated "Applique Foot" in its range of...

MSRP:

Was:

Now: $23.99
Bobbin Case for Sparrow 30 and Celine

Bobbin Case for Sparrow 30 and Sparrow Celine

MSRP:

Was:

Now: $19.99
Oliso TG1600 Pro Plus Smart Iron Yellow

Oliso Pro Plus Smart Iron TG-1600 in Yellow The most user-friendly iron you’ll ever use! The Oliso line of irons automatically lift themselves off your garment so that you never risk burning or melting heat sensitive clothing or...

MSRP:

Was:

Now: $199.99
Janome High Shank Ruler Work Foot (QR)

Janome High Shank Ruler Work Foot (QR) To make ruler work more enjoyable for all quilters, the Ruler Work foot (QR) was developed. Regular patterns that are difficult to free-motion quilt can be sewn using the Ruler Work foot and a quilting template...

MSRP:

Was:

Now: $41.99
Janome Zipper Foot E Fits 9mm Machines

Janome Zipper Foot E Fits 9mm Machines This foot can be set to sew on each side of the zipper. Also great for sewing close to piping. This is the standard zipper foot that originally comes with each of the machines listed below. For use...

MSRP:

Was:

Now: $4.99
Janome Piping Foot for 9mm Machines

Janome Piping Foot for 9mm Machines Used for attaching piping cord. Its the exact same foot the professionals use when adding fancy piping to your cushions or 3-piece suite. Piping adds the extra finishing touch to home decor projects. This foot is for...

MSRP:

Was:

Now: $23.99
Brother Bobbin Case Cover Fits CE, CS, LB, LS, PE, XR, NS, SE And Other Brother Sewing Machines

Brother Bobbin Case Cover Fits CE, CS, LB, LS, PE, XR, NS, SE And Other Brother Sewing Machines Please note: This is not the complete needle plate assembly with bobbin cover but only the bobbin cover itself. Fits Brother Models:BC2100, BC2300, BC2500,...

MSRP:

Was:

Now: $9.99
Janome Ultraglide Foot For 9mm Machines

Janome Ultraglide Foot For 9mm Machines The ultra glide foot is molded from a special resin allowing easier sewing of fabrics that may otherwise stick to the standard metal foot such as ultra suede, faux leather and plastic. This non-stick foot glides...

MSRP:

Was:

Now: $23.99
Janome Edge Stitch Foot For 9mm Machines

Janome Edge Stitch Foot For 9mm Machines This foot has unique features that allow you to stitch perfectly on the edges of fabrics. You can use it to create a number of decorative trims and hems with perfectly straight lines every time. For use with: ...

MSRP:

Was:

Now: $31.99
Janome Triangular Screwdriver

Janome Sewing Triangular Screwdriver at Premier StitchingFor use with machine models: 2040, 2160QDC, 3022, 3160QDC, 4045LX, 4045NX, 405, 4119 Quilter's Delight, 415, 419S, 423S, HSN 49360, 5812 (HF5812), 6050, 659, 660-G Jem Gold Plus, 661 (Jem Gold 2),...

MSRP:

Was:

Now: $1.99
Janome Embroidery Foot P fits 9mm Machines

Standard foot for professional embroidery on 9mm stitch width machines. Use with: EL900 eXpressive Horizon Memory Craft 12000 Horizon Memory Craft 14000 Horizon Memory Craft 15000 MC 200E MC 350E Memory Craft 400E Memory Craft 500E // // // ...

MSRP:

Was:

Now: $10.99
Gingher 8” Knife Edge Bent Dressmaker Shears

Gingher 8” Knife Edge Bent Dressmaker Shears The Gingher 8" Knife Edge Dressmaker Shears have blades strong enough to cut multiple layers of fabric effortlessly. The longer cut length is ideal for cutting out patterns and trimming seams...

MSRP:

Was:

Now: $53.79
Embroidery Foot P for Janome MC9900 & Elna EL860 eXpressive

The Embroidery Foot P fits Janome model MC9900 and Elna model EL860 eXpressive. This is a genuine Janome replacement foot that originally came with the MC9900 and Elna EL860 eXpressive.

MSRP:

Was:

Now: $4.99
Authentic Janome Sewing Bobbin Case Cleaner

Janome Bobbin Case Cleaner Apply a few drops of this cleaner to a soft cloth and wipe the bobbin holder thoroughly both inside and outside.

MSRP:

Was:

Now: $2.99
Janome AcuFeed Open Toe Satin Stitch Foot for 9mm Machines

Janome AcuFeed Open Toe Satin Stitch Foot for 9mm Machines The Janome AcuFeed Open Toe Satin Stitch Foot for 9mm Machines allows a better view of the sewing in progress. This foot can be used for quilting, monogramming, applique, and cut work. It...

MSRP:

Was: $48.30

Now: $41.99
Janome Overedge Foot M for 9mm Machines

Janome Overedge Foot M for 9mm Machines Use with an overcasting stitch to allow thread to wrap around the edge of the fabric to prevent unraveling. The foot guides the fabric and keeps your edges flat by compensating for the lack of friction when the...

MSRP:

Was:

Now: $10.99
Janome Concealed Zipper Foot For 9mm Machines

Janome Concealed Zipper Foot For 9mm Machines Good quality ready-to-wear garments will often have an invisible zip fitted. These zippers are often neglected by the home dressmaker which is a pity because they can ensure success every time. Invisible...

MSRP:

Was:

Now: $36.99
Bernette B64 Upper Knife

The Genuine Bernette B64 Airlock Serger Upper Knife is a high-quality replacement part designed for the Bernette B64 serger machine. Manufactured by the trusted brand bernettes, this upper knife ensures precise cutting and trimming of fabric for...

MSRP:

Was:

Now: $24.99
Janome Border Guide Foot for 9mm Machines

Janome Border Guide Foot for 9mm Machines Having problems lining up or evenly spacing your border designs? Now the Border Guide Foot helps you to easily match up your border designs with the red lines of the foot. No need to mark every row beforehand!...

MSRP:

Was:

Now: $23.99
Janome Convertible Even Feed Foot Set for 9mm Non Acufeed Models

Janome Convertible Even Feed Foot Set for 9mm Non Acufeed Models The Convertible Even Feed Set is designed with convenient features for the Quilter. The set includes an Even Feed foot with Closed-Toe, Convertible Open-Toe for extra visibility, a clip-on...

MSRP:

Was:

Now: $104.99
Gingher 6" Double Curved Embroidery Scissors

Gingher 6" Double Curved Embroidery Scissors Whether you’re working with machine embroidery or with an embroidery hoop, double curved embroidery scissors add comfort, improve your hand position and help select threads accurately. The frame...

MSRP:

Was:

Now: $44.99